Holy Grail Labs - M30B35 Intake Manifold Bracket
Re: Holy Grail Labs - M30B35 Intake Manifold Bracket
Update on these, the first batch should arrive this week
Re: Holy Grail Labs - M30B35 Intake Manifold Bracket
First batch arrived, all existing orders will ship tomorrow or Monday!
We have a few left of the first batch and have a second batch in production.
We have a few left of the first batch and have a second batch in production.
Re: Holy Grail Labs - M30B35 Intake Manifold Bracket
Took delivery of the piece yesterday - VERY nice looking. Now all I have to figure out is how to take that M8 bolt out from the engine mount, it feels like someone went to town when they tightened it!
Thanks to Charlie K and the Holy Grail Labs, this really is the Lord's work.
Thanks to Charlie K and the Holy Grail Labs, this really is the Lord's work.
Last edited by Foonfer on Feb 03, 2023 1:14 PM, edited 1 time in total.
-
- Posts: 658
- Joined: Jul 25, 2012 12:10 AM
- Location: Denver, Colorado
Re: Holy Grail Labs - M30B35 Intake Manifold Bracket
Mine arrived today. Well made quality piece. Thank you cek / Holy Grails.
Re: Holy Grail Labs - M30B35 Intake Manifold Bracket
Follow-up: Finally was able to take the M8 bolt out, with the help of a piece of pipe to increase leverage on my ratchet wrench. After that, the bracket went in with little effort.Foonfer wrote: ↑Feb 02, 2023 11:01 PM Took delivery of the piece yesterday - VERY nice looking. Now all I have to figure out is how to take that M8 bolt out from the engine mount, it feels like someone went to town when they tightened it!
Thanks to Charlie K and the Holy Grail Labs, this really is the Lord's work.
The only challenge was to mount back the "fuel tank breather valve" or "evaporative purge valve" (part 13901726705, #1 on here: https://www.realoem.com/bmw/enUS/showpa ... Id=13_0189). Turns out that in my M30B35 conversion, the evaporative purge valve was hung from one of the M8 threaded rods at the bottom of the intake manifold (no idea as to where is its stock location in a native M30B35 setup). When I installed the Holy Grail bracket, I realized that the steel tab that holds the evap purge valve (part 13901717023, #3 on that same diagram) had a bit too much "meat" around the mounting hole (some 1/4" all around) and was conflicting with the downward swoop of the HG bracket. I thought of crafting some tab extension to install the evap purge valve in a different configuration but there wasn't a ton of give, and I didn't want to mess around with hoses and such, plus the harness connection for the valve was right there. So I opted to go to town on the steel tab with a Dremel cutter, and trimmed it down to a neat 1/8" around the hole. 10 minute job to make it very nice and even (not as nice as the HG bracket, alas), and it was all resolved.
to quote Col. John "Hannibal" Smith - "I LOVE IT WHEN A PLAN COMES TOGETHER!"
Re: Holy Grail Labs - M30B35 Intake Manifold Bracket
Sorry for bringing back this old thread but I have a question. If I install a B35 intake manifold on a B34 engine/head, would this support work?