just something I have been working on....

Finally, a home for all you 524td oil burners out there.
Post Reply
kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

just something I have been working on....

Post by kingoftarmace2004 »

Image
gadget73
Posts: 1176
Joined: Nov 22, 2017 10:30 PM
Location: New Jersey

Re: just something I have been working on....

Post by gadget73 »

How much larger is that turbo? Whats the expected power output?

Nice work BTW. ARP head studs I'm guessing?
kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

im not sure really. its a hx30w from holset. im only going to run like 16psi. ive added a 5 speed ass swell. im hoping mybe like 165ish hp but im looking for around 250 ft lbs torque? i would be happy with that. yep those are arp head studs from a 16v VW. Thanks! -Paul
kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

Image
Image
Image
Image
Image
cek
Posts: 9206
Joined: Mar 18, 2013 6:25 PM
Location: Durango
Contact:

Re: just something I have been working on....

Post by cek »

kingoftarmace2004 wrote: Sep 15, 2020 2:40 PM Image
Image
Image
Image
Image
When on a flickr photo page click on the little up/right arrow:
Image

Choose BBCode like this:
Image

Copy the code to clipboard and past here:

ImageIMG_20200725_182326 by Paul Medlock, on Flickr
kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

ImageIMG_20200913_183304117 by Paul Medlock, on Flickr[/img]

ImageIMG_20200913_183346453 by Paul Medlock, on Flickr[/img]

ImageIMG_20200907_112002622 by Paul Medlock, on Flickr[/img]

ImageIMG_20200913_183441399 by Paul Medlock, on Flickr[/img]

BAM! pictures!
kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

it runs!!! -Paul
gadget73
Posts: 1176
Joined: Nov 22, 2017 10:30 PM
Location: New Jersey

Re: just something I have been working on....

Post by gadget73 »

Good deal.

Now for the truly important question, will it do a burnout? :)
kingoftarmace2004
Posts: 165
Joined: Mar 15, 2018 3:34 PM
Location: Fall River Mills

Re: just something I have been working on....

Post by kingoftarmace2004 »

oh for sure!!! one legger i assume till i get a lsd. if not Ive done something wrong. but for now I have to install the drive shaft/ shifter stuff. my new mishimoto e36 aluminum radiator. All the small things. oh and my straight pipped "custom exhaust"
Post Reply