bafbaf wrote:I just added one to my engine last weekend. Took me a while to figure out a good location for it. This is what I came up with:
Turns out that the 1/2" fuel/PCV line just jams perfectly into the breather port on the intake.
I'm not a big fan of the large print "OIL CATCH CAN", but for $25 I can't complain too much (I tried removing the print with various chemicals, but it resisted all of my efforts). I also need to reroute the vacuum lines better than the picture shows, but that's a different issue.
I was confused with how Id route it, this is picture is gold!