My 85 535i build

Post your photos and videos here!
Post Reply
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

My 85 535i build

Post by bkbimmer »

About a month ago I bought this 85 535i 5-speed from a fellow board member, the car is in pretty decent condition and especially for having 300k on the clock. The car had been his daily driver and has been loved and enjoyed it's whole life...

Thanks Troy!!!

The car already had a 325 lsd, dinan sway bars, dinan fixed camber plates and dinan springs.

Now I come along and screw the whole thing up ;)

Here is what it looked like the day I got it.

Image

In the last few weeks I have put a lot of love into it, and it really is paying off...

List of phase one of the build that is already completed:

- New wheel bearings/upper strut mounts
- New drag link/idler arm
- New bilstein sports
-New vogtland springs
-Complete shifter overhaul/short shift and rear trans seals
- Big brake upgrade
- Valve adjustment/oil change
-Repair OBC
-Repair rear windows (came off track)
-Build custom exhaust

Lots of cleaning on the underside.

This thing is so much fun to drive now, runs and drives really well... It is more solid feeling than almost any of the other e28's that I have driven with half the miles. Not a rattle, squeak or clunk in this thing!

I'm really pleased with my budget hotrod.


Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Last edited by bkbimmer on Dec 21, 2017 1:52 AM, edited 49 times in total.
Kyle in NO
Posts: 17638
Joined: Feb 12, 2006 12:00 PM
Location: Nasty Orleans------> Batten-Rooehjch------>More Souther LA

Post by Kyle in NO »

Wow, that is a nice exhaust!
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

Kyle in NO wrote:Wow, that is a nice exhaust!
Thanks, it's a bit loud but sounds really good.
cek
Posts: 9206
Joined: Mar 18, 2013 6:25 PM
Location: Durango
Contact:

Post by cek »

Well done!!!!!
austin8753
Posts: 1444
Joined: May 16, 2010 1:37 AM
Location: Portland, Oregon, USA

Post by austin8753 »

Riding around in this the other day made me slightly want an E28 again. Super tight, stops on a dime and sounds damn good.
CYoung
Posts: 117
Joined: Apr 18, 2011 10:48 PM
Location: Madison, WI
Contact:

Exhaust?

Post by CYoung »

What magnaflow parts did you use for the exhaust?
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Re: Exhaust?

Post by bkbimmer »

CYoung wrote:What magnaflow parts did you use for the exhaust?
Just the middle muffler and tip. 2.5" center/offset and 1 into 2 2.5" tip. Very basic exhaust. Weighs about 1/3 of the stock unit.
leadphut
Posts: 4499
Joined: Feb 12, 2006 12:00 PM
Location: Portland, OR

Post by leadphut »

Nice job Brent! You're giving it the love it always needed.

I suspect we'll be doing business again sometime in the future.
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

leadphut wrote:Nice job Brent! You're giving it the love it always needed.

I suspect we'll be doing business again sometime in the future.
Like next week?!
leadphut
Posts: 4499
Joined: Feb 12, 2006 12:00 PM
Location: Portland, OR

Post by leadphut »

i'm holding out for euro bumpers ;)
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

leadphut wrote:i'm holding out for euro bumpers ;)
For sure, I am falling in love with this bucket.
pldlnr
Posts: 2221
Joined: Sep 18, 2007 5:45 PM
Location: Seattle
Contact:

Post by pldlnr »

I love the patented Brent exhaust system. Some of the sweetest sounding exhaust notes I have heard.
wkohler
Posts: 50921
Joined: Oct 05, 2006 11:04 PM
Location: Phönix, Arizona, USA
Contact:

Post by wkohler »

bkbimmer wrote:
leadphut wrote:i'm holding out for euro bumpers ;)
For sure, I am falling in love with this bucket.
Good. I have a team of people watching the bumpers sit there as we speak. Lol.
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

wkohler wrote:
bkbimmer wrote:
leadphut wrote:i'm holding out for euro bumpers ;)
For sure, I am falling in love with this bucket.
Good. I have a team of people watching the bumpers sit there as we speak. Lol.
LMAO, sounds expensive!
Brad D.
Beamter
Beamter
Posts: 10735
Joined: Feb 12, 2006 12:00 PM
Location: San Antonio, TX
Contact:

Post by Brad D. »

That is a fantastic looking exhaust.
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

Brad D. wrote:That is a fantastic looking exhaust.
Thanks, but it's nothing fancy. It just needed something that wasn't full of holes.
leadphut
Posts: 4499
Joined: Feb 12, 2006 12:00 PM
Location: Portland, OR

Post by leadphut »

bkbimmer wrote:
Brad D. wrote:That is a fantastic looking exhaust.
Thanks, but it's nothing fancy. It just needed something that wasn't full of holes.


:laugh:

Too true.
Twelvizm
Posts: 76
Joined: Feb 08, 2011 12:48 AM
Location: Portland, Oregon
Contact:

Post by Twelvizm »

That exhaust is so sex that it gave me herpes.
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

Budget stereo system/install

I started by removing the seats and rear parcel tray, next step was to install stinger road kill sound deadening.

I built front speaker pods with diamond audio 5.25" two way speaker.

I recovered the rear tray with some left over material I had from my e34 m5, then added premium sound pods and put infinity reference two way speakers in them ( they were blue so I painted them satin black).

I built a amp rack using 3/4" mdf and used the factory holes that the trunk wall cover used.

All said and done I have under $500 in this whole system since I already had a lot of the components.

I still need to finish routing all the wire in the trunk and some sound deadening in certain area's then put the interior back in.

I tested all of it today and it sounds pretty good, I might put one of my other head units in it that has more options for tuning though.

I could have done a better job on the front pods if I had a router table but the jig saw did an okay job, they work fine and will look good when they are covered.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
tschultz
Posts: 4059
Joined: Mar 01, 2009 7:58 PM
Location: Denver, Colorado
Contact:

Post by tschultz »

When you have a project, you DO WORK!

Speaking of which, i'm also curious about the progress on your E12. I think of the years I have been a member on thsi board, most of that time, it's been in a work in process (while other cars have come and gone)
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

tschultz wrote:When you have a project, you DO WORK!

Speaking of which, i'm also curious about the progress on your E12. I think of the years I have been a member on thsi board, most of that time, it's been in a work in process (while other cars have come and gone)
My e12 has had no progress, I think about hauling to the scrap yard on a every other daily basis. It's just a heap in my way.
Twelvizm
Posts: 76
Joined: Feb 08, 2011 12:48 AM
Location: Portland, Oregon
Contact:

Post by Twelvizm »

Thank you BKbimmer for taking time away from your build to make an exhaust for my 533i. It sounds so good. It can go from being absolutely silent when in cruise on the freeway, to down shifting, putting the pedal down, and making babies cry.

It's your thread, but I'm going to whore your work on my car here.
Image

Image

Image

And a sound clip shot on my phone.
https://www.youtube.com/watch?edit=vd&v=4wKX7c3oOeY
bkbimmer
Posts: 5863
Joined: Mar 02, 2007 2:33 AM
Location: Portland, Or.

Post by bkbimmer »

No problem, I was happy to do it.
misha
Posts: 683
Joined: Feb 12, 2006 12:00 PM
Location: San Diego, ca
Contact:

Post by misha »

Nice work so far. Any pictures on how the front speaker pods mount. I was thinking of making something like that myself. Would love to see what you did.
unt0uchable
Posts: 2265
Joined: Jul 21, 2011 8:05 PM
Location: Rochester Hills, Michigan
Contact:

Post by unt0uchable »

Love the progress! You've got one hell of a budget! lol!
Post Reply