Turbo e28/e24/e23 database

Discussion pertaining to positive pressure E28s.
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Turbo e28/e24/e23 database

Post by T_C_D »

Let's get a sticky going of people who participate on this board and have successfully turbocharged (or purchased) their e28 with an aftermarket or home brew kit.

PM me your details and I'll update the thread.

1. TCD, 1985 535i euro, TCD-s3, MS2 Extra, semi daily driver, boosted m30 since 2003.
2. Kyle M, 1985 535i, TCD-s3, MS2, garage queen
3. Brad D, home brew
4. ChrisM, 1986 535i, Callaway/TCD, MS1, 993 Turbo brakes, finally drivable again, boosted since 1999
5. TurboDan, 1986 528e, GT3582R, m20b25 head with Cat Cams Turbo Cam, MS2 Extra
6. Bates, 535i, k27-60, MS1, m106, 16.5psi
7. GreyGhost, 1988 535is, k27, Motronic
8. MikeHoltmeier, 1985 535i, TCD-s3, MS2 Extra, PB Cam, stock shortblock, b34 head with b35 intake valves
9. Nebraska, 1984 533i, TCD-s3, MS2 with wasted spark, 4hp22 with TCD 3000 Stall, daily driver
10. Jim C, 535i, Cartech
11. jdb, 1985 528i euro, m30b35, Cartech/TCD
12. RussC, 1988 535is, Dinan, MS1, garage queen, last Dinan m30 built
13. Ken H., Lucifer's Hammer, TEC3R
14. Clongo, 1985 535i, k27, Motronic, 265rwhp/335rwtq
15. Bill in MN, 1986 535i, Track Whore
16. Rich in Tupelo, 1987 535is, TCD-s1, m30b35
17. Mr. Project, 1986 735i, Cartech, MS2 with wasted spark
18. Diego C, 1983 628csi euro, m102 bits, 6psi
Last edited by T_C_D on Jan 10, 2012 9:50 AM, edited 22 times in total.
mooseheadm5
Beamter
Beamter
Posts: 23035
Joined: Apr 08, 2009 10:30 PM
Location: Charlottesville, VA
Contact:

Post by mooseheadm5 »

Great idea! It would be nice to also post the engine management system running the car for reference.
Mr Project
Posts: 158
Joined: Jul 12, 2006 8:04 PM
Location: Lincoln, NE

Post by Mr Project »

Does my E23 count?

Stock B34 - bought with what looks like a Cartech kit from the early '90s. Now running MS2 w/ wasted spark.
Pedi
Posts: 368
Joined: Sep 27, 2009 10:08 AM
Location: Norway

Post by Pedi »

Mr Project wrote:Does my E23 count?
And my E28 Alpina B7 TurboKat build?
Shadow
Posts: 951
Joined: Dec 28, 2008 10:03 PM
Location: USA

Post by Shadow »

I think it's only e28s
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Post by T_C_D »

Let's keep this list e28s with aftermarket kits or home brew kits.
grey ghost
Posts: 3038
Joined: Feb 12, 2006 12:00 PM
Location: Falls Church VA

Post by grey ghost »

I'm in.... don't forget clongo
Last edited by grey ghost on Nov 30, 2011 11:18 PM, edited 1 time in total.
clongo
Posts: 1050
Joined: Nov 21, 2009 10:58 PM
Location: Raleigh, NC

Post by clongo »

Yup, 85 535i - K27 turbo and manifold with stock Motronic and TCD chip
mpowertech
Posts: 255
Joined: Sep 19, 2011 2:01 PM
Location: Baltimore, MD

e28here

Post by mpowertech »

Ok, so, only e28's???? I'd love to see some variants of the m30 irregardless of nameplate data. I am just breaking into this FI arena but would love to hear some engine management discussion from different platforms. Should we start another thread. Some would like to believe that only e28'ers are on here, but they would be sorely mistaken. There is not a true e24'er around, who doesn't lurk here 24/7! I have gained so much knowledge from this incredible site.
Golosok
Posts: 36
Joined: Jan 12, 2010 11:32 AM
Location: Israel

Re: e28here

Post by Golosok »

mpowertech wrote:Ok, so, only e28's???? I'd love to see some variants of the m30 irregardless of nameplate data. I am just breaking into this FI arena but would love to hear some engine management discussion from different platforms. Should we start another thread. Some would like to believe that only e28'ers are on here, but they would be sorely mistaken. There is not a true e24'er around, who doesn't lurk here 24/7! I have gained so much knowledge from this incredible site.
I have FI E24 too.
If you want EMS discussion you probably need to open another thread. However it seems that this board members use MS and have a lot of experience in MS.

I did two M30 setups, one with Haltech E11V2 and another one with DTA P8 Pro EMS. Both wasted spark and included building custom wiring harness.

So I can share some experience with these EMS.
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Re: e28here

Post by T_C_D »

mpowertech wrote:Ok, so, only e28's???? I'd love to see some variants of the m30 irregardless of nameplate data. I am just breaking into this FI arena but would love to hear some engine management discussion from different platforms. Should we start another thread. Some would like to believe that only e28'ers are on here, but they would be sorely mistaken. There is not a true e24'er around, who doesn't lurk here 24/7! I have gained so much knowledge from this incredible site.
Ok, I added e24s and e23s. PM me details. Factory 745i excluded.
Jeremy
Beamter
Beamter
Posts: 15841
Joined: Feb 12, 2006 12:00 PM
Location: Connecticut

Post by Jeremy »

I dunno how I missed this thread until tonight, but did you forget about me somehow?
Kyle in NO
Posts: 17638
Joined: Feb 12, 2006 12:00 PM
Location: Nasty Orleans------> Batten-Rooehjch------>More Souther LA

Post by Kyle in NO »

Hmmm, actually my turbo E28 is a 1984 533i. Missed this one too...
FirstFives Dictator
Posts: 849
Joined: Feb 12, 2006 12:00 PM
Location: Virginia Beach, VA
Contact:

Re: Turbo e28/e24/e23 database

Post by FirstFives Dictator »

T_C_D wrote:Let's get a sticky going of people who participate on this board and have successfully turbocharged (or purchased) their e28 with an aftermarket or home brew kit.

PM me your details and I'll update the thread.

1. TCD, 1985 535i euro, TCD-s3, MS2 Extra, semi daily driver, boosted m30 since 2003.
2. Kyle M, 1985 535i, TCD-s3, MS2, garage queen
3. Brad D, home brew
4. ChrisM, 1986 535i, Callaway/TCD, MS1, 993 Turbo brakes, finally drivable again, boosted since 1999
5. TurboDan, 1986 528e, GT3582R, m20b25 head with Cat Cams Turbo Cam, MS2 Extra
6. Bates, 535i, k27, MS1
7. GreyGhost, 1988 535is, k27, Motronic
8. MikeHoltmeier, 1985 535i, TCD-s3, MS2 Extra, PB Cam, stock shortblock, b34 head with b35 intake valves
9. Nebraska, 1984 533i, TCD-s3, MS2 with wasted spark, 4hp22 with TCD 3000 Stall, daily driver
10. Jim C, 535i, Cartech
11. jdb, 1985 528i euro, m30b35, Cartech/TCD
12. RussC, 1988 535is, Dinan, MS1, garage queen, last Dinan m30 built
13. Ken H., Lucifer's Hammer, TEC3R
14. Clongo, 1985 535i, k27, Motronic
15. Bill in MN, 1986 535i, Track Whore
16. Rich in Tupelo, 1987 535is, TCD-s1, m30b35
17. Mr. Project, 1986 735i, Cartech, MS2 with wasted spark
18. Diego C, 1983 628csi euro, m102 bits, 6psi
What about E12 with TCD-S2?
BATESY
Posts: 428
Joined: Jul 06, 2008 8:42 PM
Location: Renton, WA

Post by BATESY »

Im really surprised not to see more.

Dont forget, m106 swap, k27-60 trim hybrid. 16.5psi.
Shadow
Posts: 951
Joined: Dec 28, 2008 10:03 PM
Location: USA

Post by Shadow »

It would be nice to see what psi these setups are run at.
Can we get that added please?
clongo
Posts: 1050
Joined: Nov 21, 2009 10:58 PM
Location: Raleigh, NC

Post by clongo »

My 745i setup is at 15psi. Dyno 265RWHP and 335RWTQ with no intercooler and water injection. Intercooled dyno coming soon!
jim325
Posts: 185
Joined: Jul 05, 2010 12:34 PM
Location: South Carolina

Post by jim325 »

e28 body styles only, right? No e30 body styles with e28 engines? :)
turboinduction
Posts: 41
Joined: Jan 10, 2012 12:47 PM
Location: Lexington, Ky

Post by turboinduction »

Mine, 79 e24 TCD Manifold, Kormann Head, Haltech, Cartech Water-Air 22psi
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Post by T_C_D »

Trevordog91, 1989 E24, Miller MAF and W.A.R. Chip, TCD Stage 2 and exhaust, AEM Turbo Control.
sandy washburn
Posts: 21
Joined: Nov 19, 2010 9:13 PM
Location: Wellesley, Massachusetts

87 535i with K27 turbo

Post by sandy washburn »

1987 E28 535i with 745 K27 turbo and 745 exhaust manifold with stock blow off valve, custom aluminum intercooler and piping, custom CSL shape aluminum intake manifold, Link Atom ECU, VAC head, Ireland Engineering forged pistons, coated rod bearings, HD double valve springs, metal head gasket, custom stainless 3" exhaust system. This conversion was worked on during the past five years and the engine dynoed at 330HP with modest boost and more is anticipated with higher boost. Suspension and brakes are M5 quality. The car is probably close to an E28 Alpina B7 for 1/4 the cost.
Last edited by sandy washburn on Jul 02, 2018 1:42 PM, edited 1 time in total.
SF-535is
Posts: 608
Joined: Dec 26, 2007 6:04 PM
Location: San Francisco Bay Area

Post by SF-535is »

1987 e24 dinan turbo m30b34 purchased from original owner with all documentation (even gas receipts)
Boosted since '91
Car has all mods offered by Dinan except the dash/gauge pod.

---I didn't even know this thread was here either. Better late than never. :)
Kelvin
Posts: 10
Joined: Sep 19, 2009 6:13 PM
Location: maryland

Post by Kelvin »

89 e24 m30b35 with manual swap, ms2, upgraded 745 stuff, meth injection, and everything else. 327whp 402wtq at 15psi (currently).

Edit: 8/30/14 on mustang dyno, 384whp 493wtq. 400ft lbs by 2900rpm. .120 mls arp studs. 19psi tapering to 17psi.
Last edited by Kelvin on Sep 01, 2014 2:08 PM, edited 1 time in total.
BMW545iTurbo
Posts: 4
Joined: Nov 26, 2013 5:44 PM

Turbo e28/e24/e23 database

Post by BMW545iTurbo »

Diamond Black 1988 535is with:
1981 745i M102 Factory Turbo Motor (256 RWHP and 291 Ft-LB Torque)
3-inch custom Stainless Steel Exhaust
E34 Brakes w/Vented Rotors
Euro M5 Aero (minus side-skirts)
Suspension Techniques Adjustable Sway Bars
17-inch Style 32 Wheels with 245/45-17 Rubber
Rolled Fender Lips
Urethane and HD Suspension Bushings
Adjustable Rear Camber/Toe via Dungeon Motorsport brackets and BMW Eccentric Bolts
E28 Euro Front Headlight Grills and Headlight Buckets

1984 745i M106 Factory Turbo
Hartge Front Strut Brace
16-inch BBS RS Wheels
Adjustable Rear Camber/Toe
BBS 745i Turbo Front Air Dam (original)
Miller Chip (not WAR)
Miller MAF (Gen 2)
Miller Adjustable Wastegate
Factory BMW/BBS Rear Rubber Trunk Spoiler
bornagain
Posts: 756
Joined: Apr 19, 2008 2:18 PM
Location: Edmonton AB

Re: Turbo e28/e24/e23 database

Post by bornagain »

Im late to the party and havent been on the boards for a while, but....


1983 533i custom turbo setup, garrett gt3571 ms2x air intercooler 18x12x3 60lbs injectors 3"exhaust

1987 325is m30b32 swap, O-ringed, head studs, bullseye performance borg warner s366 turbo, MS3X air intercooled 80lbs injectors 4" exhaust, 625cc W/M

theres way more to list for both but you get the idea.

the 5 series runs 6.5psi boost it was running more but clutch slip and me being a cheap as didnt wanna change it, so boost went down.

The 3 series is running 14psi right now but is built for 28psi last tranny i melted doing a pull(shitty original tranny to be honest though, 260/5 out of 533i donor car with 48*,*** something kms) hoping for over 600whp
Post Reply