gt35/t4 for m106 ?

Discussion pertaining to positive pressure E28s.
Post Reply
marc79euro645
Posts: 455
Joined: Dec 09, 2008 12:33 AM

gt35/t4 for m106 ?

Post by marc79euro645 »

I want more from my m106. My current 745 setup runs good, and seems to be solid.
I'm using MS2,
60# injectors from TCD
manual boost controller with m102(early) waste gate (cranked shut)
3" exhaust
I could do the kkk27 upgrade, but I'm tempted by the prices of the cheap ebay turbos.
I'm looking at this one
https://www.ebay.com/itm/Universal-Perf ... Sw92RbH3zo
My goal would be 400 hp/400tq at wheels.
I would be notching the t4 bolt holes to bolt to the 745 manifold. I also will do some porting on the manifold.

What do you think of the t4 a/r of .82 for street driving?
marc79euro645
Posts: 455
Joined: Dec 09, 2008 12:33 AM

Re: gt35/t4 for m106 ?

Post by marc79euro645 »

Well, I ordered an .68 t4, gt35 ebay turbo. This one has a 66mm inducer on the compressor, so it's a little big. I hope the .68 turbine housing will get it spooling. Turbine wheel is 74/64mm, which is close to my kkk27 at 76/64, so hopefully the turbine won't be a choke point. I'll report back once I get it installed.
euroshark90
Posts: 58
Joined: Mar 22, 2016 11:46 AM
Location: St. petersburg

Re: gt35/t4 for m106 ?

Post by euroshark90 »

That should be a great fit. Im running a 6262 turbo with a .82 t3 exhaust housing. Boost comes in around 2400, I kinda wanted the 66 wheel Anyway. I think you made the right choice
marc79euro645
Posts: 455
Joined: Dec 09, 2008 12:33 AM

Re: gt35/t4 for m106 ?

Post by marc79euro645 »

thanks for the feedback! I'll report back once it's installed.
Tiit
Posts: 217
Joined: Oct 06, 2017 6:27 AM
Location: Canberra

Re: gt35/t4 for m106 ?

Post by Tiit »

Following
Post Reply