Reproduction M decals for front and rear
-
- Posts: 343
- Joined: Nov 05, 2011 11:30 PM
- Location: San Diego, CA
Reproduction M decals for front and rear
Hello,
I am making a bunch of properly sized and angled ///M stickers specifically for our E28 M5s. My front and rears are original and faded. I purchased the commonly available eBay stickers but they are of the wrong size and wrong angle, even though they said they were for the E28 M5. I took meticulous measurements of each sticker's width, height, and angle and redesigned them in Adobe Illustrator. What's interesting is the original stickers are not proportionate, but do maintain the same parallelogram angle.
I am working with a local decal maker to make durable decals that will withstand UV. I'll let everyone know when they're done! Please reply if you're interested so I can get a rough idea of how many to print. Pricing should be very cheap (I'm estimating $10), and shipping free since they are just decals and can be shipped with USPS standard letter stamps.
get a url for an image
I am making a bunch of properly sized and angled ///M stickers specifically for our E28 M5s. My front and rears are original and faded. I purchased the commonly available eBay stickers but they are of the wrong size and wrong angle, even though they said they were for the E28 M5. I took meticulous measurements of each sticker's width, height, and angle and redesigned them in Adobe Illustrator. What's interesting is the original stickers are not proportionate, but do maintain the same parallelogram angle.
I am working with a local decal maker to make durable decals that will withstand UV. I'll let everyone know when they're done! Please reply if you're interested so I can get a rough idea of how many to print. Pricing should be very cheap (I'm estimating $10), and shipping free since they are just decals and can be shipped with USPS standard letter stamps.
get a url for an image
Last edited by 524tdAviator on Jun 12, 2022 4:04 AM, edited 1 time in total.
Re: Reproduction M decals for front and rear
I'd be interested.
Etip
Etip
-
- Posts: 104
- Joined: Feb 09, 2019 11:15 AM
- Location: houston
Re: Reproduction M decals for front and rear
That's a good deal.
I made a set out of a roll of BMW ///M vinyl I bought off Amazon. A little time and fun at the kitchen table and I had plenty left over to refinish the M-Tech steering wheel badge.
I made a set out of a roll of BMW ///M vinyl I bought off Amazon. A little time and fun at the kitchen table and I had plenty left over to refinish the M-Tech steering wheel badge.
Re: Reproduction M decals for front and rear
I will take a set!
jeff
jeff
Re: Reproduction M decals for front and rear
Interested in a set for the rear trunk lid.
I am assuming that the logos are the same for both the M5 and M535i; I will have to do a little research.
I am assuming that the logos are the same for both the M5 and M535i; I will have to do a little research.
Re: Reproduction M decals for front and rear
I’ll take a set of rear stripes! I was just about to order a set off eBay but would rather support a member!
Re: Reproduction M decals for front and rear
I would take a front/back set.
AJC
AJC
Re: Reproduction M decals for front and rear
I will take a front and back decal as well.
Thanks
Jeff
Thanks
Jeff
Re: Reproduction M decals for front and rear
I’ll take a front/back set. Thanks!
Re: Reproduction M decals for front and rear
I'll take a set.
-
- Posts: 113
- Joined: Jan 05, 2021 7:32 PM
- Location: Westchester Co NY
Re: Reproduction M decals for front and rear
I’m curious, would you consider doing them for the steering wheel badge as well offer as a package?
-
- Posts: 28
- Joined: Jun 08, 2010 11:10 AM
Re: Reproduction M decals for front and rear
I'd be interested in a set also
-
- Posts: 9380
- Joined: Feb 12, 2006 12:00 PM
- Location: Minneapolis
Re: Reproduction M decals for front and rear
If you mean the little thing on the bottom rung on the steering wheel, they're still available from BMW for a reasonable price.Fanclutchnut wrote: ↑Jul 05, 2022 5:13 PM I’m curious, would you consider doing them for the steering wheel badge as well offer as a package?
https://www.realoem.com/bmw/enUS/showpa ... 2331155957
Re: Reproduction M decals for front and rear
Are these available yet or any updates?
Thanks
Thanks
Re: Reproduction M decals for front and rear
Put me down for 2 to 3 sets
Thanks
Thanks
Re: Reproduction M decals for front and rear
Hey there, any update on these? I need a rear one!!
Re: Reproduction M decals for front and rear
Anyone get any decals yet ?
If the OP has made them I would easily find the need for 3 sets (front and back)
Where is that eating popcorn icon ...
If the OP has made them I would easily find the need for 3 sets (front and back)
Where is that eating popcorn icon ...
-
- Posts: 343
- Joined: Nov 05, 2011 11:30 PM
- Location: San Diego, CA
Re: Reproduction M decals for front and rear
A little update on the decals. I made a run of 50. The rears were spot on accurate in dimension but I was not happy with the front sticker fitment. I'm in the process of redoing the front (angle was just barely off) and will have them printed again. So sorry for the delay! Please give me 3 weeks and I will contact everyone who expressed interest.
Re: Reproduction M decals for front and rear
Thanks man. Appreciate your work
Re: Reproduction M decals for front and rear
I’m in for r a front and rear set