Hartge type A 16”
Hartge type A 16”
I have a decent set of hartge type A wheels for sale. There 5x120. No curb rash and comes with tires. There 16 inch wheels. Located in queens New York close to jfk airport. Preferred local pick up. I don’t have any pics right now but I will get some soon as there buried in my garage. I’m asking $2000 call or text 7187953828.
-
- Posts: 461
- Joined: Feb 22, 2008 7:36 AM
- Location: Riverton, New Jersey
Re: Hartge type A 16”
Staggered or a square set? Center caps included? Thanks!
Re: Hartge type A 16”
I found the listing on Facebook Marketplace. I’m pretty sure these are the ones listed here as they’re located in NY as well.
https://www.facebook.com/marketplace/it ... df1c217997
https://www.facebook.com/marketplace/it ... df1c217997
Re: Hartge type A 16”
Probably so, especially since the information is just as sketchy.
Re: Hartge type A 16”
There not staggered the center caps are included.
Re: Hartge type A 16”
Yes and the Facebook marketplace listing are the same listing as these. But being sketchy is for the non believers.
Re: Hartge type A 16”
Sketchy is when you don't list the width or offset and only the bolt pattern. Not my business if you're not interested in making a sale.
Re: Hartge type A 16”
OP, I'll try to help take some of the "sketchyness" away.
If the wheels are 16x7.5" then ET13 is the offset, if 16x8.5 then ET25 is the offset.
Do yourself a favor, pop the center caps off and check. The information is there.
I've had both staggered and square sets of both sizes on a e28 and had no issues. The 8.5" square required 5mm spacers for the fronts.
Currently running 16x7.5 front/16x8.5 rear and like the setup.
If the wheels are 16x7.5" then ET13 is the offset, if 16x8.5 then ET25 is the offset.
Do yourself a favor, pop the center caps off and check. The information is there.
I've had both staggered and square sets of both sizes on a e28 and had no issues. The 8.5" square required 5mm spacers for the fronts.
Currently running 16x7.5 front/16x8.5 rear and like the setup.
Re: Hartge type A 16”
I’m pretty sure there 16x7.5 et13 but not positive on that. I’ll have to confirm that when I get home on Tuesday. But I’m not worried about the sale of these I’m pretty sure I’ll get them sold at my convenience.
-
- Posts: 4912
- Joined: Feb 12, 2006 12:00 PM
- Location: NNV
Re: Hartge type A 16”
Doubt it will be on this forum.
Thanks for playing!!!
Thanks for playing!!!
Re: Hartge type A 16”
there definitely 7 1/2j x 16 h2 et13 h6765.111.
Re: Hartge type A 16”
Kevin,
Clean those wheels up! $2,000 is steep for all 7.5" The staggered setup is what was offered by HARTGE e24, e28 and e23.
I have new Hartge emblems in silver and blue.
Clean those wheels up! $2,000 is steep for all 7.5" The staggered setup is what was offered by HARTGE e24, e28 and e23.
I have new Hartge emblems in silver and blue.
Re: Hartge type A 16”
https://www.facebook.com/marketplace/it ... 488728156/ Hey thanks for the info. I’m trying to get some time to get these cleaned up. Price is pretty negotiable at this time as I have to get these of my hands.