WTB :: used 4hp22 in PDX for eta
-
- Posts: 685
- Joined: Apr 03, 2008 2:21 AM
- Location: Brooklyn
WTB :: used 4hp22 in PDX for eta
I’m looking for a used transmission for rebuild, in or around Portland, OR. 4hp22 non-EH, for a 528e. Anyone have a giant door stop they’d like to get rid of? Thanks!
Last edited by Fedaykin528e on Apr 07, 2022 3:53 PM, edited 1 time in total.
Re: WTB :: used 4hp22 in PDX
Not PDX, but I've got one in the HTX,
M20 fitment.
$100 + freight.
M20 fitment.
$100 + freight.
Re: WTB :: used 4hp22 in PDX
If your looking for one for an m30 I’ve got a functional one in a running 533i that will be getting parted out soon.
-
- Posts: 685
- Joined: Apr 03, 2008 2:21 AM
- Location: Brooklyn
Re: WTB :: used 4hp22 in PDX
Thanks guys. I should have specified m20b27 fitment, I’ve updated the post.
-
- Posts: 685
- Joined: Apr 03, 2008 2:21 AM
- Location: Brooklyn
Re: WTB :: used 4hp22 in PDX for eta
Still looking. e28 donor preferred, it's unclear if e30 units interchange. Thanks!
-
- Posts: 685
- Joined: Apr 03, 2008 2:21 AM
- Location: Brooklyn
Re: WTB :: used 4hp22 in PDX for eta
Yeah, I was drafting a PM to you when I decided to bump instead. I don't want to waste anyone's time, I felt bad asking you for a shipping quote without trying to find one locally first.
Re: WTB :: used 4hp22 in PDX for eta
They're just sitting here.Fedaykin528e wrote: ↑Jul 08, 2022 5:30 PM Yeah, I was drafting a PM to you when I decided to bump instead. I don't want to waste anyone's time, I felt bad asking you for a shipping quote without trying to find one locally first.
I have 2 of them for M20 fitment.
One has a 4 holed output flange and the other 3 holed.
-
- Posts: 685
- Joined: Apr 03, 2008 2:21 AM
- Location: Brooklyn
Re: WTB :: used 4hp22 in PDX for eta
I need to double check my flange, and I'll report back. There is a 4 flange unit in Portland, but it's out of an e30.
Re: WTB :: used 4hp22 in PDX for eta
Pm sent for 2 units for 100 bucks in Seattle... 1 is bad a pack, 4hp22 not eh. 1 was working when removed but m30 and eh. 2 for 100. Tidying up
-
- Posts: 685
- Joined: Apr 03, 2008 2:21 AM
- Location: Brooklyn
Re: WTB :: used 4hp22 in PDX for eta
Found one in Tacoma, thanks all.
Also, from what I have found there is an A and B model 4hp22, one for low and one for high power applications (i.e. M20/30 vs. Land Rover V8. I'm fairly confident I am 100% ok using an e30 unit, and swapping the output flanges shouldn't be a problem if they differ. It's right there on Wiki! https://en.wikipedia.org/wiki/ZF_4HP22_transmission
Also, from what I have found there is an A and B model 4hp22, one for low and one for high power applications (i.e. M20/30 vs. Land Rover V8. I'm fairly confident I am 100% ok using an e30 unit, and swapping the output flanges shouldn't be a problem if they differ. It's right there on Wiki! https://en.wikipedia.org/wiki/ZF_4HP22_transmission