FS: Reproduction M5 Grille Emblems - Final run.

Buy, sell, or trade parts.
Das_Prachtstrasse
Posts: 5612
Joined: Sep 10, 2006 7:06 AM
Location: Melbourne, Doooown Under

FS: Reproduction M5 Grille Emblems - Final run.

Post by Das_Prachtstrasse »

Hi all,

I have started reproducing the e28 specific, M5 grille emblem which has long been NLA. The original part number is 51141919480.

The latest reproductions are now 3D printed in Nylon (PA12), with laser cut, mirror polished 304 stainless scripting. The tri-colour logo is a printed, permanent self adhesive which the manufacturer guarantees for colour and adhesion over 5 years of constant UV and weather exposure - should stand up to the car covers and garages just fine. The tabs on the rear are brass as original, albeit slightly thinner to allow for easier bending into place.

Image
Image

At this stage, please register your interest in this thread by adding your name and qty to the list and as I produce them I'll chronologically contact you to arrange payment, usually within 2-3 weeks or so pending how hectic the rest of my schedule has become.. ;)

Thanks!

Christian

UPDATE 9/9/21

Production run complete! I am about 3 emblems away from fulfilling the wait list, and will be pausing production on these for a short while. Thankyou all for you support and positive feedback, I do appreciate it greatly.

For those that missed out, rest assured that I will do another run in due course and will update this thread when that time happens. Record your interest either by replying to this thread, or via pm and I'll add you to the new wait list.

Cheers.

UPDATE 15/06/22

Hi all. I've had a bit of interest recently in doing another run of these emblems so as with the last run, please register your interest either in this thread or via PM and I'll add your name to the wait list.

There is sadly a small price increase of $5 for each emblem, due to increases across the board in shipping and raw materials.

The price for each emblem is now $90USD delivered worldwide and $75USD for each additional.

Thanks!

UPDATE 10/01/24

Final production has commenced on these. The latest reproductions are now 3D printed in Nylon (PA12) using MJF but I've kept the pricing the same as the previous batch. I have 25 total left, with about 10 spoken for at this stage - I'm not planning to perform another run in the future, so get one while you can!

Cheers,

Christian.
Last edited by Das_Prachtstrasse on Jan 10, 2024 6:12 AM, edited 8 times in total.
RMP
Posts: 74
Joined: Nov 27, 2008 7:35 AM

Re: FS: Reproduction M5 Grille Emblems

Post by RMP »

One please for my M5.

Thanks
Roger.
mtrspt5
Posts: 65
Joined: Feb 12, 2006 12:00 PM
Location: Naperville, IL

Re: FS: Reproduction M5 Grille Emblems

Post by mtrspt5 »

Yes, put me down for one. Thanks
Cannabis9478
Posts: 10
Joined: Jun 20, 2016 9:20 PM
Location: Auckland, New Zealand

Re: FS: Reproduction M5 Grille Emblems

Post by Cannabis9478 »

I am keen for 2, thanks.
Das_Prachtstrasse
Posts: 5612
Joined: Sep 10, 2006 7:06 AM
Location: Melbourne, Doooown Under

Re: FS: Reproduction M5 Grille Emblems

Post by Das_Prachtstrasse »

Thanks for the interest you lot, I've got a few under way now so will contact you shortly.

The list as it stands:

RMP x 1
mtrspt5 x 1
Cannabis9478 x 2
austin8753
Posts: 1444
Joined: May 16, 2010 1:37 AM
Location: Portland, Oregon, USA

Re: FS: Reproduction M5 Grille Emblems

Post by austin8753 »

hi there. i would take one unit.

A
Ken H.
Posts: 1819
Joined: Dec 04, 2006 8:43 PM
Location: Suburban Gomorrah

Re: FS: Reproduction M5 Grille Emblems

Post by Ken H. »

I'm in for one unit.
gray635
Posts: 1996
Joined: Dec 06, 2006 11:29 PM
Location: Perry, GA

Re: FS: Reproduction M5 Grille Emblems

Post by gray635 »

Christian:

I've already got 1 OE spare, but this is such a great service to M5 owners, I'll take one just to support the cause! Top work. :D
jeffg
Posts: 14
Joined: Jul 22, 2008 9:34 PM
Location: New Jersey

Re: FS: Reproduction M5 Grille Emblems

Post by jeffg »

I will take 1.

Thanks
Jeff
Simsimma30
Posts: 14
Joined: Jan 12, 2020 7:25 PM
Location: Socal

Re: FS: Reproduction M5 Grille Emblems

Post by Simsimma30 »

I’ll take one please
Das_Prachtstrasse
Posts: 5612
Joined: Sep 10, 2006 7:06 AM
Location: Melbourne, Doooown Under

Re: FS: Reproduction M5 Grille Emblems

Post by Das_Prachtstrasse »

gray635 wrote: Jul 05, 2021 2:00 PM Christian:

I've already got 1 OE spare, but this is such a great service to M5 owners, I'll take one just to support the cause! Top work. :D
Thanks, Mike! :beer:


The list as it stands:

RMP x 1
mtrspt5 x 1
Cannabis9478 x 2
austin8753 x 1
Ken H. x 1
Mike Gray x 1
jeffg x 1
simsimma30 x 1
N44RP
Posts: 97
Joined: Oct 14, 2017 12:38 AM
Location: Fl

Re: FS: Reproduction M5 Grille Emblems

Post by N44RP »

Are you able to make these without the “5”
Leaving just the ///M?
EuroE28M5
Posts: 348
Joined: Jan 27, 2014 4:10 PM
Location: Aurora, Ontario

Re: FS: Reproduction M5 Grille Emblems

Post by EuroE28M5 »

I'll take two please.
EuroShark
Posts: 1474
Joined: Feb 12, 2006 12:00 PM
Location: Colorado

Re: FS: Reproduction M5 Grille Emblems

Post by EuroShark »

Two for me please
Bryce
Posts: 15
Joined: Nov 23, 2020 2:20 AM
Location: Seattle

Re: FS: Reproduction M5 Grille Emblems

Post by Bryce »

1 for me please
Das_Prachtstrasse
Posts: 5612
Joined: Sep 10, 2006 7:06 AM
Location: Melbourne, Doooown Under

Re: FS: Reproduction M5 Grille Emblems

Post by Das_Prachtstrasse »

N44RP wrote: Jul 06, 2021 8:00 AM Are you able to make these without the “5”
Leaving just the ///M?
I can, although with the original ones still available it's not high on my priority list. If for some reason I end up with a few left over M's, I'll let you know.

The list as it stands:

RMP x 1
mtrspt5 x 2
Cannabis9478 x 2
austin8753 x 1
Ken H. x 1
Mike Gray x 1
jeffg x 1
simsimma30 x 1
Euroe28M5 x 2
EuroShark x 2
Bryce x 1
socalM5
Posts: 374
Joined: Jul 28, 2013 1:58 PM
Location: USA

Re: FS: Reproduction M5 Grille Emblems

Post by socalM5 »

If I could please get 2

List as it stands:


RMP x 1
mtrspt5 x 2
Cannabis9478 x 2
austin8753 x 1
Ken H. x 1
Mike Gray x 1
jeffg x 1
simsimma30 x 1
Euroe28M5 x 2
EuroShark x 2
Bryce x 1
Socalm5 x 2
modernclassics.co
Posts: 16
Joined: Sep 28, 2017 1:54 AM
Location: Orlando fl

Re: FS: Reproduction M5 Grille Emblems

Post by modernclassics.co »

can i put this on my 520 ?
Jeff B.
Posts: 183
Joined: Feb 12, 2006 12:00 PM
Location: San Diego

Re: FS: Reproduction M5 Grille Emblems

Post by Jeff B. »

please add my name to the list for 2
socalM5
Posts: 374
Joined: Jul 28, 2013 1:58 PM
Location: USA

Re: FS: Reproduction M5 Grille Emblems

Post by socalM5 »

Current list for you jeff


RMP x 1
mtrspt5 x 2
Cannabis9478 x 2
austin8753 x 1
Ken H. x 1
Mike Gray x 1
jeffg x 1
simsimma30 x 1
Euroe28M5 x 2
EuroShark x 2
Bryce x 1
Socalm5 x 2
Jeff B. X 2
MattyCV
Posts: 63
Joined: Jul 21, 2017 11:54 AM
Location: Seattle

Re: FS: Reproduction M5 Grille Emblems

Post by MattyCV »

Hey Christian,

Would love to add myself to the list for 1 emblem. Updated list below; thank you!

RMP x 1
mtrspt5 x 2
Cannabis9478 x 2
austin8753 x 1
Ken H. x 1
Mike Gray x 1
jeffg x 1
simsimma30 x 1
Euroe28M5 x 2
EuroShark x 2
Bryce x 1
Socalm5 x 2
Jeff B. x 2
MattyCV x 1
wkohler
Posts: 50921
Joined: Oct 05, 2006 11:04 PM
Location: Phönix, Arizona, USA
Contact:

Re: FS: Reproduction M5 Grille Emblems

Post by wkohler »

I received mine the other day and these are VERY impressive. Excellent work and those on the list will not be disappointed.
Das_Prachtstrasse
Posts: 5612
Joined: Sep 10, 2006 7:06 AM
Location: Melbourne, Doooown Under

Re: FS: Reproduction M5 Grille Emblems

Post by Das_Prachtstrasse »

wkohler wrote: Jul 20, 2021 1:32 AM I received mine the other day and these are VERY impressive. Excellent work and those on the list will not be disappointed.
Thankyou, Chris. :thanks:

An update for you all - I’ve filled about half the orders for those on the list, but am now awaiting the arrival of some more brass to manufacture the mounting tabs. Supply chains aren’t what they used to be but I’ll be in touch soon.
Snoopy11
Posts: 114
Joined: Jul 19, 2014 12:13 AM
Location: East Coast

Re: FS: Reproduction M5 Grille Emblems

Post by Snoopy11 »

RMP x 1
mtrspt5 x 2
Cannabis9478 x 2
austin8753 x 1
Ken H. x 1
Mike Gray x 1
jeffg x 1
simsimma30 x 1
Euroe28M5 x 2
EuroShark x 2
Bryce x 1
Socalm5 x 2
Jeff B. x 2
MattyCV x 1
Snoopy11 x 2
bigwave
Posts: 178
Joined: Apr 03, 2013 10:43 PM
Location: Buffalo

Re: FS: Reproduction M5 Grille Emblems

Post by bigwave »

Please put me down for 1.
Thanks, Todd
Post Reply