WTB - single mass flywheel and trans crossmember for early 528e

Buy, sell, or trade parts.
Post Reply
robyfaught
Posts: 39
Joined: Sep 13, 2014 2:05 PM
Location: Lexington, KY

WTB - single mass flywheel and trans crossmember for early 528e

Post by robyfaught »

I have some manual swap parts from an 84 528e but I am missing a single mass flywheel and transmission crossmember. I have a getrag 260 transmission so I need the crossmember that has the triangular holes in the center section. Please let me know what you have, thanks!
Last edited by robyfaught on Oct 06, 2020 4:05 PM, edited 1 time in total.
BavAdrian533i
Posts: 222
Joined: Nov 12, 2014 8:52 PM
Location: Fresno CA

Re: WTB - single mass flywheel and trans crossmember for early 528e

Post by BavAdrian533i »

I have a trans crossmember but not sure if its the correct one. Text me i can send pics. 559 916-1047
robyfaught
Posts: 39
Joined: Sep 13, 2014 2:05 PM
Location: Lexington, KY

Re: WTB - single mass flywheel and trans crossmember for early 528e

Post by robyfaught »

Bump. I believe any crossmember from a g260 e28 should work.
vviking
Posts: 360
Joined: Sep 20, 2006 5:16 PM
Location: Vacaville,CA

Re: WTB - single mass flywheel and trans crossmember for early 528e

Post by vviking »

I have the single mass flywheel and crossmember. Email me for pictures: shermanmartinez at hotmail dot com
robyfaught
Posts: 39
Joined: Sep 13, 2014 2:05 PM
Location: Lexington, KY

Re: WTB - single mass flywheel and trans crossmember for early 528e

Post by robyfaught »

Email sent.
robyfaught
Posts: 39
Joined: Sep 13, 2014 2:05 PM
Location: Lexington, KY

Re: WTB - single mass flywheel and trans crossmember for early 528e

Post by robyfaught »

Bump. Still looking for a single mass flywheel for an m20. Needs to have the pins around the outside for the transmission mounted crank triggers.
Post Reply