group buy: in-cluster digital oil temp/pressure gauge
Re: group buy: in-cluster digital oil temp/pressure gauge
If anyone is daunted by the cluster mods I can offer this as a service for a reasonable cost. I have spare clusters which would help speed part of the process and I can guide you through the rest. PM me and we can talk.
Re: group buy: in-cluster digital oil temp/pressure gauge
If anyone wants to sell an unused set, I will be interested for GB price.
Re: group buy: in-cluster digital oil temp/pressure gauge
Too bad I paid three times more than the GB price.
Re: group buy: in-cluster digital oil temp/pressure gauge
I've been taking high resolution images during my assembly. I've been lazy about putting it together, and your wiring choices may vary, given I'm plumbing mine into the aftermarket radio.
I'll post what I have when my cloud backup (500gb. Could be a while at 750kbs) finishes syncing and I can move files without all sorts of duplication errors.
I'll post what I have when my cloud backup (500gb. Could be a while at 750kbs) finishes syncing and I can move files without all sorts of duplication errors.
-
- Posts: 658
- Joined: Jul 25, 2012 12:10 AM
- Location: Denver, Colorado
Re: group buy: in-cluster digital oil temp/pressure gauge
Please do! Thanks.Owndapwn wrote:I've been taking high resolution images during my assembly. I've been lazy about putting it together, and your wiring choices may vary, given I'm plumbing mine into the aftermarket radio.
I'll post what I have when my cloud backup (500gb. Could be a while at 750kbs) finishes syncing and I can move files without all sorts of duplication errors.
-
- Posts: 386
- Joined: Dec 28, 2014 2:32 AM
- Location: South Carolina
Re: group buy: in-cluster digital oil temp/pressure gauge
I've listed my (unopened) set in C for sale for the GB price, if anyone is interested.
EDIT: SOLD
EDIT: SOLD
Re: group buy: in-cluster digital oil temp/pressure gauge
Anyone has the wire diagram?
Or can copy information here.
See on page 5 that there was sent a mail to all the buyers with wire instructions.
Or can copy information here.
See on page 5 that there was sent a mail to all the buyers with wire instructions.
Re: group buy: in-cluster digital oil temp/pressure gauge
Does anyone have a source for M10x1.0 to M12x1.5 adapters, to allow the pressure sender to be installed in the rear of the head, where the stock switch is?
I've seen a couple of these in pictures, but no luck finding one for sale.
I've seen a couple of these in pictures, but no luck finding one for sale.
Re: group buy: in-cluster digital oil temp/pressure gauge
What's the status of the list for this? I asked to be added to it on April 2015 and then on December 2015. Never got any feedback.
Re: group buy: in-cluster digital oil temp/pressure gauge
Andreas Claas (http://www.claasi.de/) that made them still sell it for 120 Euro + shipment. mail: rolandbmw02@aol.com
Re: group buy: in-cluster digital oil temp/pressure gauge
He charged me like$350 for mine.
-
- Posts: 67
- Joined: Jan 27, 2012 9:14 PM
Re: group buy: in-cluster digital oil temp/pressure gauge
I'm in for a set
Re: group buy: in-cluster digital oil temp/pressure gauge
?wkohler wrote:He charged me like$350 for mine.
Should be like $128 + shipment... Why pay that price
Re: group buy: in-cluster digital oil temp/pressure gauge
BECAUSE THAT IS WHAT HE CHARGED ME!!
$264. Just found the check. Still more than twice as much.
$264. Just found the check. Still more than twice as much.
-
- Posts: 85
- Joined: Apr 15, 2014 10:28 PM
- Location: Grafton, WI
- Contact:
Re: group buy: in-cluster digital oil temp/pressure gauge
Yea, me too.GermanPanzer wrote:I'm in for a set
-- Added Mar 12, 2017 8:45 AM --
I emailed him last night (Rolland, not Andreas). Here are the pricing details.
The digital oil pressure and oil temperature gauges are delivered in a set for €120 containing:
- the display
- the electronic in a housing
- the display foil
- all cables and mounting material.
He also sells the required senders:
1. a VDO 0-10bar with warning contact ( 10-180 Ohm), M12x1.5 - €42
2. an original BMW E30 M3 oil temperature sender - €30
Shipping:
- Germany €5
- EU €13
- Worldwide €15
Sender fitment/adapters depend on engine.
Re: group buy: in-cluster digital oil temp/pressure gauge
BECAUSE THAT IS WHAT HE CHARGED ME!!
Wkohler, didn't you receive the senders and the distribution block with your order? I don't recall how Roland determined the price, but 250.00 plus 14.00 shipping would have been in the ballpark a few years ago. I do recall the temp sender costing nearly 40.00, and the pressure sender was slightly more. Sorry you feel slighted.
Bob Newman
Wkohler, didn't you receive the senders and the distribution block with your order? I don't recall how Roland determined the price, but 250.00 plus 14.00 shipping would have been in the ballpark a few years ago. I do recall the temp sender costing nearly 40.00, and the pressure sender was slightly more. Sorry you feel slighted.
Bob Newman
Re: group buy: in-cluster digital oil temp/pressure gauge
i don't feel slighted. I do have senders and the block. The original group buy seemed to have senders included. I guess I didn't realize the block isn't a standard piece. I haven't gotten around to installing it yet since I've been so busy so I haven't looked at it since it arrived. I think timing was the worst thing since I bought mine from him and then the group buy happened immediately after.
-
- Posts: 67
- Joined: Jan 27, 2012 9:14 PM
Re: group buy: in-cluster digital oil temp/pressure gauge
josepilove wrote:Yea, me too.GermanPanzer wrote:I'm in for a set
-- Added Mar 12, 2017 8:45 AM --
I emailed him last night (Rolland, not Andreas). Here are the pricing details.
The digital oil pressure and oil temperature gauges are delivered in a set for €120 containing:
- the display
- the electronic in a housing
- the display foil
- all cables and mounting material.
He also sells the required senders:
1. a VDO 0-10bar with warning contact ( 10-180 Ohm), M12x1.5 - €42
2. an original BMW E30 M3 oil temperature sender - €30
Shipping:
- Germany €5
- EU €13
- Worldwide €15
Sender fitment/adapters depend on engine.
Thanks , I will s send PayPal money to that email.
Re: group buy: in-cluster digital oil temp/pressure gauge
My advice would be to acquire your own senders. The pressure sender I received was generic and not VDO. It registers 8-9 bar when cold and despite the oil pump having less than 10k miles on it, i don't believe the S38 is capable of building building north of 117 PSI
-
- Posts: 67
- Joined: Jan 27, 2012 9:14 PM
Re: group buy: in-cluster digital oil temp/pressure gauge
Attention Rolland, I sent payment to your email.
Thank you
Thank you
Re: group buy: in-cluster digital oil temp/pressure gauge
You wouldn't happen to have a part number for the VDO sender in M12x1.5, would you?ahab wrote:My advice would be to acquire your own senders. The pressure sender I received was generic and not VDO. It registers 8-9 bar when cold and despite the oil pump having less than 10k miles on it, i don't believe the S38 is capable of building building north of 117 PSI
-
- Posts: 85
- Joined: Apr 15, 2014 10:28 PM
- Location: Grafton, WI
- Contact:
Re: group buy: in-cluster digital oil temp/pressure gauge
The VDO part number is: 360-024Owndapwn wrote:You wouldn't happen to have a part number for the VDO sender in M12x1.5, would you?
I found it at eGauges.com for $36 - https://www.egauges.com/ProductDetails. ... de=360-024
-
- Posts: 1601
- Joined: Nov 08, 2011 11:02 PM
- Location: West Bro, MA
in-cluster digital oil temp/pressure gauge
Greets! Anyone have one of these available? Thank you!