Dieselboost's 524compoundTD

Finally, a home for all you 524td oil burners out there.
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: DIESELBOOST'S 524TDst (Sleeping over the winter)

Post by DieselBoost »

well guys say goodbye to ve6 pump... not for the next summer but in next engine.... i just got bosch p-series 113 scania's pump...

it was cheap 250e and it has 10mm plungers... well few modifications and re-sealing + service and it will be good for installing... which is quite challenging operation but done before by other guys...

Like in this Volvo d24td http://harri82.1g.fi/kuvat/Muita%20auto ... /_full.jpg
i have seen video about this car running....

and in this mercedes om606 engine too https://www.youtube.com/watch?v=kE0FjNPeosU
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

Just bought new tools with almost 300e to garage and compressor too....

but the best what i bought is new Nova cut50 plasmacutter.... say goodbye for angle grinder :P
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

Well i has new parts for my future engine, just bought an M57D30TU 90mm crank shaft for my m21
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

New parts again.... new gearbox for future.... i just got an E36 M3 5speed zf gearbox.... goodbye for old getrag 260
Jelmer538i
Posts: 1222
Joined: Feb 12, 2006 12:00 PM
Location: Netherlands
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by Jelmer538i »

The M50 family engines sit at an higher angle than the M20 family engines, how are you going to do that?
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

If it does not fit... i will make it fit.... by cutting getrag's case and welding it to the zf's case, like in many other transmissions fitted to totally different cars...

today i bought some parts for the summer and the inspection of the year...
New front stock shocks + top bearings, dust guards and bumps guards...

i will get my coils set in next winter so now need to drive with these
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

Just got info from my friend who has m3 zf gearbox in m20 engine in he's racing car.... he said that it fits directly to m20 based engines like m21 but in little bit different angle, so shifter is positioned only little bit different
slammin_e28
Posts: 6135
Joined: Aug 05, 2007 4:57 PM
Location: 24477

Re: Dieselboost's 524td-st Project ongoing again

Post by slammin_e28 »

Ya, M20 will tilt the box like 10 degrees....so you have to twist the selector mount and rod a bit and do up a custom trans mount.
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

Almost ready for the road :banana:

I will post some pics in my eyecandy section... so stay tuned up
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

well i have an deadline.... 22.5 our bmw meet, i will be there with my crap pile...

biggest problem is that i dont have plenty of time caused by my work... but it will be ready soon :P
rovers
Posts: 119
Joined: Nov 11, 2014 1:01 PM
Location: Sweden

Re: DIESELBOOST'S 524TDst (Sleeping over the winter)

Post by rovers »

DieselBoost wrote:well guys say goodbye to ve6 pump... not for the next summer but in next engine.... i just got bosch p-series 113 scania's pump...

it was cheap 250e and it has 10mm plungers... well few modifications and re-sealing + service and it will be good for installing... which is quite challenging operation but done before by other guys...

Like in this Volvo d24td http://harri82.1g.fi/kuvat/Muita%20auto ... /_full.jpg
i have seen video about this car running....

and in this mercedes om606 engine too https://www.youtube.com/watch?v=kE0FjNPeosU
does this meen u have a ve-pump that i can buy? ;)
Ghillie
Posts: 15
Joined: Dec 07, 2014 2:38 AM

Re: Dieselboost's 524td-st Project ongoing again

Post by Ghillie »

btw, quick question.
What flywheel are you using?
Modified m20?
618plate with a sinter?

ive been trying to hunt down a singlemass diesel flywheel but thats not the easiest..
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: DIESELBOOST'S 524TDst (Sleeping over the winter)

Post by DieselBoost »

rovers wrote:
DieselBoost wrote:does this meen u have a ve-pump that i can buy? ;)
Indeed it means that, but it will take some time... im considering to pull engine out about in next winter...
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

Ghillie wrote:btw, quick question.
What flywheel are you using?
Modified m20?
618plate with a sinter?

ive been trying to hunt down a singlemass diesel flywheel but thats not the easiest..
Nope...

M30B28 flywheel with sre 240mm pressure setup and regular organic LUK plate
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

I has been little lazy with my biturbo engine project, all parts are in my storage and ext manifold is ready etc...

But old singleturbo engine is now running good and clutch works better than ever.
now im welding bonnet hole shut and modified old intercooler tubes, so now they are under front skirt
little electrics mods are done like kill switch in trunk and soldered joints in 16mm power cable

so at this moment everything almost perfect for next summer
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

It seems that my car is going to inspection in two weeks, after that it is again on the road...
I will do some mods for this summer still..... it will look more classy 80s tuning soon
-bbs rs 17" replica wheels
-bbs front spoiler
-two 80s antennas at trunk
-silver stripe tape on side (two striped)

I want to go with louver, but i dont have one.... i want window wind deflectors too... but i can only find those for front doors :(

Now intercooler is hidden in front, and hole in bonnet is deleted...
Engine is same old one, but biturbo setup is what im doing for this summer...
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524td-st Project ongoing again

Post by DieselBoost »

almost everything is ready for road....
My compound twin turbo setup is ready and finished... ready for final assembly...
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524compoundTD on the road

Post by DieselBoost »

Today i just got car inspected and road use... so there will be updates soon... ;)
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524compoundTD on the road

Post by DieselBoost »

And here is some incar video of my compound setup https://www.youtube.com/watch?v=DNZOK_ihtvM
T_C_D
Posts: 7733
Joined: May 27, 2009 11:42 AM
Location: Twin Cities
Contact:

Re: Dieselboost's 524compoundTD on the road

Post by T_C_D »

Cool!
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524compoundTD on the road

Post by DieselBoost »

I broke it again!!! :banana:

Head gasket is leaking again.... due to old block surface and mls gasket... BUT...

There was 255hp and 600nm i want more, but injection pump fails again
etwoate
Posts: 1
Joined: Aug 07, 2019 7:40 PM
Location: 17202

Re: Dieselboost's 524compoundTD

Post by etwoate »

Sooo has anyone ever heard from him ever again... I have been reading and studying this thread for a year and I decided to follow in his footsteps and see what I can do with my 524td from America and it’s still auto so bear with me :D
DieselBoost
Posts: 697
Joined: Sep 27, 2008 8:39 AM
Location: Finland
Contact:

Re: Dieselboost's 524compoundTD

Post by DieselBoost »

BOOM!.... guess who is back!....

I has still my td, but it has been in storage from 2016 due to my day job and motivation.... and "few other projects"

I has two honda cbr 600f bikes... one is carby turbo and other is supercharged efi... both are old 90s bikes...

major change is, that i has own workshop with car lift, tig/mig welding machines, lathe, milling machine and many other machines in my shop...
AAAND.... i bought in 2019 Nitro harley, which is now my main project...

So im trying to get it ready that i can ride with it... not in next summer, but hopefully soon...

And what comes to my td.... my friend just finished my mercedes 8mm pump... im been waiting it about three years now :laugh:

If you want, you can follow me on instagram.... nick is nitro_gnome
Panici
Posts: 217
Joined: Aug 07, 2014 2:04 AM
Location: Canada

Re: Dieselboost's 524compoundTD

Post by Panici »

DieselBoost wrote: Mar 05, 2023 2:52 AM BOOM!.... guess who is back!....

I has still my td, but it has been in storage from 2016 due to my day job and motivation.... and "few other projects"

I has two honda cbr 600f bikes... one is carby turbo and other is supercharged efi... both are old 90s bikes...

major change is, that i has own workshop with car lift, tig/mig welding machines, lathe, milling machine and many other machines in my shop...
AAAND.... i bought in 2019 Nitro harley, which is now my main project...

So im trying to get it ready that i can ride with it... not in next summer, but hopefully soon...

And what comes to my td.... my friend just finished my mercedes 8mm pump... im been waiting it about three years now :laugh:

If you want, you can follow me on instagram.... nick is nitro_gnome
Love a good thread bump!

Ahh cars & bikes, I too have this problem. And it's not a bad problem to have! 😀
Only so much time and money, but at least you still have the E28.
Post Reply